Van Gas Technologies' GasDry Peak™ is an absorbent deliquescent desiccant formulated for single and sequential tower natural gas dryers. This wet bed desiccant is a hard tablet formed from hygroscopic materials that attract and hold moisture. The materials in the compound are non-toxic and completely soluble in water.

As the desiccant tablet draws water vapor out of the natural gas, the surface of the tablet slowly dissolves and forms a solution which eventually drops from its surface. The deliquescent desiccant tablet continues to remove moisture and forms this solution until the tablet is entirely consumed. When used in a properly sized single or sequential tower desiccant gas dryer, GasDry Peak will remove sufficient moisture vapor to establish a 33% RH in the gas line.

Recommended for use where the operating temperature is at or below 80° F, GasDry Peak is specifically formulated to be used as a first stage absorbent desiccant in the natural gas dehydration process. This deliquescent desiccant is also highly recommended for point of use applications. When applied in higher operating temperatures, a pre-bed of ceramic bead support is recommended to minimize channeling in the desiccant bed.

For over six decades, Van Gas Technologies has been an industry leader in absorbent desiccant technology. Please contact us today with any questions you may have or to place your order.

No energy or fuel gas consumption

For operating temperatures 80°F and lower

Prevents condensation

Inhibits natural gas hydrate formation

Prevents gas line freeze-ups

No BTEX emissions

Environmentally safe

Available in 50# bags, 50# pails, 506# steel drums and 2,000# bulk bags

³/₄" tablet