GasDry Max™ is the most agressive absorbent deliquescent desiccant for use with single and sequential tower natural gas dryers on the market. This wet bed desiccant is a hard tablet formed from hygroscopic materials that attract and hold moisture. The materials in the compound are non-toxic and completely soluble in water.

As the desiccant tablet draws water vapor out of the natural gas, the surface of the tablet slowly dissolves and forms a solution which eventually drops from its surface. The deliquescent desiccant tablet continues to remove moisture and forms this solution until the tablet is entirely consumed. When used in a properly sized single or sequential tower desiccant gas dryer, GasDry Max will remove sufficient moisture vapor to establish a 13% RH in the gas line.

GasDry Max is recommended for use where the operating temperature is at or below 100° F. For applications where the temperature conditions exceed 100° F, a pre-bed of ceramic bead support is recommended to minimize channeling in the desiccant bed.

For over six decades, Van Gas Technologies has been an industry leader in absorbent desiccant technology. Please contact us today with any questions you may have or to place your order.

Requires no energy or fuel gas consumption

For operating temperatures 100°F and lower

Prevents condensation

Inhibits gas hydrate formation

Prevents gas line freeze-up

Environmentally safe

Replace TEG dehydrators

No BTEX emissions

1" diameter tablet

Little or no maintenance required for drying equipment

Available in 7# pails and 25# pails